System Access Configuration - Lenovo RackSwitch G8332 Command Reference Manual

System Access Configuration

382
G8332 Command Reference for ENOS 8.4
The following table describes the System Access commands.
Table 165.
System Access Configuration Options
Command Syntax and Usage
[no] access http enable
Enables or disables HTTP (Web) access to the Browser‐Based Interface.
The default settings is enabled.
Command mode: Global configuration
access http port <TCP port number (1‐65535)>
Sets the switch port used for serving switch Web content.
The default is HTTP port 80.
Command mode: Global configuration
default access http port
Resets the HTTP port to the default port number ‐ 80.
Command mode: Global configuration
access snmp {read­only|read­write}
Enables read‐only/write‐read SNMP access.
Command mode: Global configuration
no access snmp
Disables SNMP access.
Command mode: Global configuration
[no] access telnet enable
Enables or disables Telnet access.
The default setting is enabled.
Command mode: Global configuration
access telnet port <TCP port number (1‐65535)>
Sets an optional Telnet server port number for cases where the server listens
for Telnet sessions on a non‐standard port.
Command mode: Global configuration
default access telnet port
Resets the Telnet server port to the default port number ‐ 23.
Command mode: Global configuration
access tftp­port <TCP port number (1‐65535)>
Sets the TFTP port for the switch.
The default is port 69.
Command mode: Global configuration