Dcbx Port Configuration - Lenovo RackSwitch G8332 Command Reference Manual
Iscli - industry standard
cli command reference
for lenovo enterprise network operating
system
8.4
Hide thumbs
Also See for RackSwitch G8332:
- Installation manual (88 pages) ,
- Installation manual (122 pages)
Table of Contents
Advertisement
DCBX Port Configuration
© Copyright Lenovo 2016
The following table describes the port DCB Capability Exchange Protocol (DCBX)
configuration options.
Table 352.
Port DCBX Configuration Options
Command Syntax and Usage
[no] cee port <port alias or number> dcbx app_proto advertise
Enables or disables DCBX Application Protocol advertisements of
configuration data. When enabled, the Advertisement flag is set to 1 (advertise
data to the peer device).
Command mode: Global configuration
[no] cee port <port alias or number> dcbx app_proto willing
Enables or disables Application Protocol willingness to accept configuration
data from the peer device. When enabled, the Willing flag is set to 1 (willing to
accept data).
Command mode: Global configuration
[no] cee port <port alias or number> dcbx enable
Enables or disables DCBX on the port.
Command mode: Global configuration
[no] cee port <port alias or number> dcbx ets advertise
Enables or disables DCBX ETS advertisements of configuration data. When
enabled, the Advertisement flag is set to 1 (advertise data to the peer device).
Command mode: Global configuration
[no] cee port <port alias or number> dcbx ets willing
Enables or disables ETS willingness to accept configuration data from the peer
device. When enabled, the Willing flag is set to 1 (willing to accept data).
Command mode: Global configuration
[no] cee port <port alias or number> dcbx pfc advertise
Enables or disables DCBX PFC advertisements of configuration data. When
enabled, the Advertisement flag is set to 1 (advertise data to the peer device).
Command mode: Global configuration
[no] cee port <port alias or number> dcbx pfc willing
Enables or disables PFC willingness to accept configuration data from the peer
device. When enabled, the Willing flag is set to 1 (willing to accept data).
Command mode: Global configuration
show cee port <port alias or number> dcbx
Displays the current port DCBX parameters.
Command mode: All
Chapter 4: Configuration Commands
625
Advertisement
Table of Contents
