QSFP Port Configuration
692
G8332 Command Reference for ENOS 8.4
The following table displays the QSFP Port configuration commands.
Table 397.
QSFP Port Options
Command Syntax and Usage
[no] boot qsfp40gports <port alias or number>
Enables or disables 40GbE mode on the selected QSFP+ ports.
When enabled, each QSFP+ port is set as a single 40GbE port.
When disabled, each QSFP+ port is configured to breakout into four 10GbE
ports.
Note: You must reboot the switch for this change to take effect.
Command mode: Global configuration
show boot qsfpportmodes
Displays the current QSFP parameters.
Command mode: All