582
G8332 Command Reference for ENOS 8.4
Table 314.
IGMP Querier Configuration Options (continued)
Command Syntax and Usage
ip igmp querier vlan <VLAN ID (1‐4094)> maxresponse <1‐256>
Configures the maximum time, in tenths of a second, allowed before
responding to a Membership Query message.
The default value is 100.
By varying the Query Response Interval, an administrator may tune the
burstiness of IGMP messages on the subnet; larger values make the traffic less
bursty, as host responses are spread out over a larger interval.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> maxresponse
Resets the maximum time allowed before responding to a Membership Query
message to its default value of 100.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> queryinterval <1‐608>
Configures the interval between IGMP Query broadcasts.
The default value is 125 seconds.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> queryinterval
Resets the interval between IGMP Query broadcasts to its default value of 125
seconds.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> robustness <1‐10>
Configures the IGMP Robustness variable, which is the number of times that
the switch sends each IGMP message.
The default value is 2.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> robustness
Resets the IGMP Robustness variable to its default value of 2.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> sourceip <IP address>
Configures the IGMP source IP address for the selected VLAN.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> sourceip
Removes the configured IGMP source IP address for the specified VLAN.
Command mode: Global configuration