© Copyright Lenovo 2016
Table 52.
IGMP Multicast Group Information Commands (continued)
Command Syntax and Usage
show ip igmp mrouter [dynamic|interface port <port alias or number>|
|portchannel <1‐208>|static]
Displays information for all Mrouters, all dynamic/static Mrouter ports
installed or Mrouter ports specific to a specified interface/portchannel.
Command mode: All
show ip igmp mrouter information
Displays IGMP Multicast Router information. For details, see page
Command mode: All
show ip igmp mrouter vlan <VLAN ID (1‐4094)>
Displays IGMP Multicast Router information for the specified VLAN.
Command mode: All
show ip igmp profile <1‐16>
Displays information about the current IGMP filter.
Command mode: All
show ip igmp querier port <port alias or number>
Displays IGMP Querier information for a particular port.
Command mode: All
show ip igmp querier vlan <VLAN ID (1‐4094)>
Displays IGMP Querier information for a particular VLAN. For details, see
page
118.
Command mode: All
show ip igmp relay
Displays IGMP Relay information.
Command mode: All
show ip igmp snoop
Displays IGMP Snooping information.
Command mode: All
show ip igmp snoop igmpv3
Displays the current IGMPv3 Snooping configuration.
Command mode: All
119.
Chapter 2: Information Commands
117