Pim Multicast Route Information Commands - Lenovo RackSwitch G8332 Command Reference Manual

PIM Multicast Route Information Commands

138
G8332 Command Reference for ENOS 8.4
The following commands display PIM Multicast Route information:
Table 59.
PIM Multicast Route Information Options
Command Syntax and Usage
show ip pim mroute
Displays information about all PIM multicast routes.
Command mode: All
show ip pim mroute [<component ID (1‐2)>]
Displays PIM multicast routes for the selected component.
Command mode: All
show ip pim mroute count
Displays a count of PIM multicast routes of each type.
Command mode: All
show ip pim mroute flags [s] [r] [w]
Displays PIM multicast routes based on the selected entry flags. Enter flags in
any combination:
s: Shortest Path Tree (SPT) bit

r: Rendezvous Point Tree (RPT) bit

w: Wildcard bit

Command mode: All
show ip pim mroute group <multicast group IP address>
Displays PIM multicast routes for the selected multicast group.
Command mode: All
show ip pim mroute interface {<interface number>|port
<port alias or number>}
Displays PIM multicast routes for the selected incoming IP interface.
Command mode: All
show ip pim mroute source <multicast source IP address>
Displays PIM multicast routes for the selected source IP address.
Command mode: All