Hot Links Trigger Configuration
490
G8332 Command Reference for ENOS 8.4
The following table describes the Hot Links Trigger commands.
Table 250. Hot Links Trigger Configuration Options
Command Syntax and Usage
[no] hotlinks trigger <1‐25> enable
Enables or disables the Hot Links trigger.
Command mode: Global configuration
hotlinks trigger <1‐25> forwarddelay <0‐3600>
Configures the Forward Delay interval, in seconds.
The default value is 1 second.
Command mode: Global configuration
hotlinks trigger <1‐25> name <1‐32 characters>
Defines a name for the Hot Links trigger.
Command mode: Global configuration
no hotlinks trigger <1‐25> name
Removes the name of the specified Hot Links trigger.
Command mode: Global configuration
[no] hotlinks trigger <1‐25> preemption
Enables or disables pre‐emption, which allows the Master interface to
transition to the Active state whenever it becomes available.
The default setting is enabled.
Command mode: Global configuration
no hotlinks trigger <1‐25>
Deletes the Hot Links trigger.
Command mode: Global configuration
show hotlinks trigger <1‐25>
Displays the current Hot Links trigger settings.
Command mode: All