Lenovo RackSwitch G8332 Command Reference Manual page 341

© Copyright Lenovo 2016
Table 146.
System Configuration Options (continued)
Command Syntax and Usage
system time <hh>:<mm>:<ss>
Configures the system time using a 24‐hour clock format. The time retains its
value when the switch is rebooted.
Command mode: Global configuration
system timezone [<time zone index (1‐374)>]
Configures the time zone where the switch resides. You are prompted to select
your location (continent, country, region) by the timezone wizard. Once a
region is selected, the switch updates the time to reflect local changes to
Daylight Savings Time, etc.
The time zone can be directly specified using its unique time zone index.
Command mode: Global configuration
no system timezone
Deletes the time zone configuration.
Command mode: Global configuration
system usb­eject
Allows you to safely remove a USB drive from the USB port, without
corrupting files on the drive.
Command mode: Global configuration
terminal dont­ask
Disables CLI confirmation prompts for the current session. The switch will
choose the default answer.
By default, CLI confirmation prompts are enabled, if they are not configured
differently by using the prompting command.
Note: When using this command any settings configured through the
prompting command will be temporarily disregarded for the duration of the
current session.
Command mode: All
no terminal dont­ask
Enables CLI confirmation prompts for the current session.
By default, CLI confirmation prompts are enabled, if they are not configured
differently by using the prompting command.
Command mode: All
terminal­length <0‐300>
Configures the number of lines per screen displayed in the CLI for the current
session. A value of 0 disables paging.
By default, it is set to the corresponding line vty length or line
console length value in effect at login.
Command mode: All
Chapter 4: Configuration Commands
341