OpenFlow Configuration Information
156
G8332 Command Reference for ENOS 8.4
The following command displays the OpenFlow configuration for all instances:
show openflow information
Command mode: All
In OpenFlow 1.0:
Openflow feature is Enabled
Openflow instance 1 is currently disabled
Openflow Instance ID: 2
State : Enabled
DataPath ID: 0x0002749975ab5c00
Max Retries per controller: 4
Echo Request Interval: 30
Echo Reply Timeout: 15
Emergency Timeout: 30
Minflowtimeout : 0, use controller provided values.
Max ACL Flows: Maximum Available
Max Unicast FDB Flows: Maximum Available
Max Multicast FDB Flows: Maximum Available
Buffering: Disabled
Operational Mode: Normal
Miss Send Len: 65535
Port Alias Status State Config Current Advertised Supported Peer
18 18 e 0x200 0x2 0xc0 0x0 0x0 0x0
19 19 e 0x200 0x2 0xc0 0x0 0x0 0x0
24 24 d 0x201 0x2 0xc0 0x0 0x0 0x0
86 23/1 d 0x201 0x2 0x0 0x0 0x0 0x0
87 23/2 d 0x201 0x2 0x0 0x0 0x0 0x0
88 23/3 d 0x201 0x2 0x0 0x0 0x0 0x0
89 23/4 d 0x201 0x2 0x0 0x0 0x0 0x0
Number of Ports: 7
Configured Controllers:
Openflow Controller 1:
IP Address: 9.70.31.71
Port: 6633
State: Active
Retry Count: 0