Lenovo RackSwitch G8332 Command Reference Manual page 747

© Copyright Lenovo 2016
Thread LOG_NOTICE Message (continued)
NTP System clock updated
nsx‐gw Disabling NWV mode is in process.....wait.....
nsx‐gw Disabling NWV mode is complete.
OSPF Neighbor Router ID <router ID>, Neighbor State {Down|
Loopback|Waiting|P To P|DR|BackupDR|DR Other|Attempt|
Init|2 Way|ExStart|Exchange|Loading|Full}
SERVER link {down|up} on port <port>
SSH (remote disconnect msg)
SSH <username>(<user type>) {logout|ejected|idle timeout|connection
closed} from {Console|Telnet/SSH}
SSH <username>(<user type>) login {on Console|from host <IP address>}
SSH Error in setting the new config
SSH Failed login attempt via SSH
SSH New config set
SSH scp<username>(<user type>) {logout|ejected|idle timeout|
connection closed} from {Console|Telnet/SSH}
SSH scp<username>(<user type>) login {on Console|from host
<IP address>}
SSH Wrong config file type
SYSTEM Change fibre GIG port <port> mode to full duplex
SYSTEM Change fibre GIG port <port> speed to 1000
SYSTEM Changed ARP entry for IP <IP address> to: MAC <MAC address>,
Port <port>, VLAN <VLAN>
SYSTEM Enable auto negotiation for copper GIG port: <port>
SYSTEM I2C device <ID> <description> set to access state <state> [from CLI]
SYSTEM Port <port> disabled
SYSTEM Port <port> disabled due to reason code <reason code>
Appendix A: Enterprise NOS System Log Messages
747