370
G8332 Command Reference for ENOS 8.4
Table 155.
System SNMP Options (continued)
Command Syntax and Usage
no snmpserver host <trap host IP address>
Removes the trap host server.
Command mode: Global configuration
[no] snmpserver linktrap [port] <port alias or number> enable
Enables or disables the sending of SNMP link up and link down traps for a
specific system port.
The default setting is disabled.
Command mode: Global configuration
snmpserver location <1‐64 characters>
Configures the name of the system location. The location can have a maximum
of 64 characters.
Command mode: Global configuration
no snmpserver location
Deletes the name of the system location.
Command mode: Global configuration
snmpserver name <1‐64 characters>
Configures the name for the system. The name can have a maximum of 64
characters.
Command mode: Global configuration
no snmpserver name
Deletes the name of the system.
Command mode: Global configuration
snmpserver readcommunity <1‐32 characters>
Configures the SNMP read community string. The read community string
controls SNMP "get" access to the switch. It can have a maximum of 32
characters.
The default read community string is public.
Command mode: Global configuration
[no] snmpserver readcommunityadditional <1‐32 characters>
Adds or removes an additional SNMP read community string. Up to 7
additional read community strings are supported.
Command mode: Global configuration
snmpserver timeout <1‐30>
Sets the timeout value for the SNMP state machine, in minutes.
Command mode: Global configuration