Rip Route Redistribution Configuration - Lenovo RackSwitch G8332 Command Reference Manual

RIP Route Redistribution Configuration

© Copyright Lenovo 2016
The following table describes the RIP Route Redistribution commands.
Table 276.
RIP Redistribution Options
Command Syntax and Usage
[no] redistribute {fixed|static|ospf|eospf|ebgp|ibgp}
{<1‐255>|all}
Adds or removes selected routing maps to the RIP route redistribution list. To
add specific route maps, enter routing map numbers, separated by a comma(,).
To add or remove all 255 route maps, type all.
The routes of the redistribution protocol matched by the route maps in the
route redistribution list will be redistributed.
Command mode: Router RIP
redistribute {fixed|static|ospf|eospf|ebgp|ibgp} export
<metric number (1‐15)>
Exports the routes of this protocol in which the metric and metric type are
specified.
Command mode: Router RIP
no redistribute {fixed|static|ospf|eospf|ebgp|ibgp} export
Stops exporting the routes of the specified protocol.
Command mode: Router RIP
show ip rip redistribute
Displays the current RIP route redistribute configuration.
Command mode: All
Chapter 4: Configuration Commands
529