Quality of Service Information
140
G8332 Command Reference for ENOS 8.4
The following commands display QoS information:
Table 60.
QoS information Options
Command Syntax and Usage
show qos protocolpacketcontrol information queue [all]
Displays the packet rate configured for each configurable packet queue. The
all option also displays the packet rate configured for each reserved packet
queue.
Command mode: All
show qos protocolpacketcontrol information protocol
Displays of mapping of protocol packet types to each packet queue number.
The status indicates whether the protocol is running or not running.
Command mode: All
show qos randomdetect
Displays WRED and ECN information. For details, see page
Command mode: All
show qos transmitqueue
Displays the current 802.1p parameters.
Command mode: All
show qos transmitqueue information
Displays all 802.1p information. For details, see page
Command mode: All
142.
141.