OpenFlow Statistics
282
G8332 Command Reference for ENOS 8.4
The following commands display OpenFlow statistics:
Table 128.
OpenFlow Statistics Commands
Command Syntax and Usage
show openflow statistics
Displays OpenFlow traffic statistics for each OpenFlow instance.
Command mode: All
show openflow instance <1‐2> statistics
Displays OpenFlow traffic statistics for the specified instance ID.
Command mode: All
clear openflow statistics
Clears OpenFlow data for all instances.
Command mode: Privileged EXEC
clear openflow instance <1‐2> statistics
Clears OpenFlow data for the specified instance ID.
Command mode: Privileged EXEC
Use the following command to display OpenFlow traffic statistics for each
OpenFlow instance:
show openflow statistics
Command mode: All
In OpenFlow 1.0:
Openflow instance 1 is currently disabled
Openflow statistics for instance 2
Flow Count
Basic Flows: 3
(ACL Based: 3, Unicast FDB Based: 0, Multicast FDB Based: 0)
Emergency Flows: 0
(ACL Based: 0, Unicast FDB Based: 0, Multicast FDB Based: 0)
Buffering Count:
Openflow Packets Buffered : 0
Openflow Packets Timed out : 0
Openflow Packets Retrieved : 0
Openflow Packets Retrieve attempts : 0
Message Count
HelloSent: 1 HelloReceived: 1
EchoRequestSent: 31 EchoRequestReceived: 60
EchoReplySent: 60 EchoReplyReceived: 31
Vendor: 0