Show Recent Syslog Messages
48
G8332 Command Reference for ENOS 8.4
The following command displays system log messages:
show logging [messages] [severity <0‐7>] [reverse]
Command mode: All
Current syslog configuration:
host 0.0.0.0 via MGT port, severity 7, facility 0
host2 0.0.0.0 via MGT port, severity2 7, facility2 0
console enabled
severity level of console output 6
severity level of write to flash 7
syslogging all features
Syslog source loopback interface not set
Nov 2 5:49:53 172.25.254.19 INFO console: System log cleared by user
admin.
Nov 2 5:51:23 172.25.254.19 CRIT system: Fan Mod 4 Removed
Nov 2 5:54:27 172.25.254.19 CRIT system: **** MAX TEMPERATURE (61)
ABOVE FAIL THRESH ****
Nov 2 5:54:27 172.25.254.19 CRIT system: **** PLATFORM THERMAL
SHUTDOWN ****
Nov 2 6:02:06 0.0.0.0 NOTICE system: link up on management port MGT
Nov 2 6:02:06 0.0.0.0 INFO system: booted version 0.0.0 from FLASH
image2, active configuration
Nov 2 6:02:09 0.0.0.0 NOTICE system: SR SFP+ inserted at port 63 is
Approved
Nov 2 6:02:12 0.0.0.0 NOTICE system: 1m DAC inserted at port 64 is
Accepted
Nov 2 6:02:12 0.0.0.0 NOTICE system: link up on management port MGT
Nov 2 6:03:11 0.0.0.0 NOTICE ip: MGT port default gateway 172.25.1.1
operational
Nov 2 6:22:54 172.25.254.19 NOTICE mgmt: admin(admin) login on Console
Nov 2 6:33:00 172.25.254.19 NOTICE mgmt: admin(admin) idle timeout
from Console
Each syslog message has a severity level associated with it, included in text form as
a prefix to the log message. One of eight different prefixes is used, depending on
the condition that the administrator is being notified of, as shown here.
EMERG
Indicates the system is unusable
ALERT
Indicates action should be taken immediately
CRIT
Indicates critical conditions
ERR
Indicates error conditions or errored operations
WARNING
Indicates warning conditions
NOTICE
Indicates a normal but significant condition
INFO
Indicates an information message
DEBUG
Indicates a debug‐level message
The severity option filters only syslog messages with a specific severity level
between 0 and 7, from EMERG to DEBUG correspondingly.
The reverse option displays the output in reverse order, from the newest entry to
the oldest.