Lenovo RackSwitch G8332 Command Reference Manual page 659

© Copyright Lenovo 2016
Table 374.
OpenFlow Configuration Options (continued)
Command Syntax and Usage
mirror­to­controller cookie <0x0‐0xffffffffffffffff>
Sets the flow cookie for packets sent to controller as a result of a
mirror‐to‐controller setting (flow is set to output the packet to a controller in
addition to another destination).
The default value is 0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
no mirror­to­controller cookie
Resets the mirror‐to‐controller flow cookie to the default value of
0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
send­to­controller cookie <0x0‐0xffffffffffffffff>
Sets the flow cookie for packets sent to controller as a result of a
send‐to‐controller setting (flow is set to output the packet only to a controller).
The default value is 0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
no send­to­controller cookie
Resets the send‐to‐controller flow cookie to the default value of
0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
static­table
Configures static flows. For command options, see page
Command mode: OpenFlow Instance
table­miss cookie <0x0‐0xffffffffffffffff>
Sets the flow cookie for packets sent to controller as a result of a table‐miss
setting (send input packets that don't match any flow entries to controller).
The default value is 0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
no table­miss cookie
Resets the table‐miss flow cookie to the default value of
0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
662.
Chapter 4: Configuration Commands
659