ACL Metering Configuration
424
G8332 Command Reference for ENOS 8.4
These commands define the Access Control profile for the selected ACL.
Table 198.
ACL Metering Configuration Options
Command Syntax and Usage
accesscontrol list <1‐256> meter action {drop|pass}
Configures the ACL Meter to either drop or pass out‐of‐profile traffic.
Command mode: Global configuration
accesscontrol list <1‐256> meter committedrate <64‐40000000>
Configures the committed rate, in kilobits per second. The committed rate
must be a multiple of 64.
Command mode: Global configuration
[no] accesscontrol list <1‐256> meter enable
Enables or disables ACL Metering.
Command mode: Global configuration
accesscontrol list <1‐256> meter maximumburstsize <32‐4096>
Configures the maximum burst size, in kilobits. Enter one of the following
values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096.
Command mode: Global configuration
default accesscontrol list <1‐256> meter
Sets the ACL meter configuration to its default values.
Command mode: Global configuration
no accesscontrol list <1‐256> meter
Disables the selected ACL meter.
Command mode: Global configuration
show accesscontrol list <1‐256> meter
Displays current ACL Metering parameters.
Command mode: All