Zoneset Configuration
© Copyright Lenovo 2016
Use the following commands to configure FCF zonesets.
Table 358.
Fibre Channel Zoneset Configuration Commands
Command Syntax and Usage
[no] zoneset activate name <1‐64 characters> vlan <VLAN ID (2‐4094)>
Activates or deactivates the zoneset. Only one zoneset can be active at any
point in time. Activating a zoneset automatically deactivates any other zoneset
currently active.
Command mode: Global configuration
zoneset clone <selected zoneset name> <new zoneset name> vlan
<VLAN ID (2‐4094)>
Creates a new zoneset with the attributes of the selected zoneset.
Command mode: Global configuration
[no] zoneset name <1‐64 characters> vlan <VLAN ID (2‐4094)>
Enter FC Zoneset configuration mode for the specified zone. If the zoneset
doesn't exist, it is created.
The no form of the command erases the zoneset.
Command mode: Global configuration
zoneset rename <current name> <new name> vlan <VLAN ID (2‐4094)>
Renames the FC zoneset.
Command mode: Global configuration
[no] member name <1‐64 characters> vlan <VLAN ID (2‐4094)>
Adds or removes a zone from the zoneset.
Command mode: FC Zoneset configuration
Chapter 4: Configuration Commands
631