SNMPv3 Target Parameters Table Information
SNMPv3 Notify Table Information
44
G8332 Command Reference for ENOS 8.4
The following command displays SNMPv3 target parameters information:
show snmpserver v3 targetparameters
Command mode: All
Name MP Model User Name Sec Model Sec Level
v1v2param snmpv2c v1v2only snmpv1 noAuthNoPriv
Table 16.
SNMPv3 Target Parameters Table Information
Field
Description
Name
Displays the locally arbitrary, but unique identifier associated with
this snmpTargeParamsEntry.
MP Model
Displays the Message Processing Model used when generating
SNMP messages using this entry.
User Name
Displays the securityName, which identifies the entry on whose
behalf SNMP messages will be generated using this entry.
Sec Model
Displays the security model used when generating SNMP
messages using this entry. The system may choose to return an
inconsistentValue error if an attempt is made to set this
variable to a value for a security model the system does not
support.
Sec Level
Displays the level of security used when generating SNMP
messages using this entry.
The following command displays the SNMPv3 Notify Table:
show snmpserver v3 notify
Command mode: All
Name Tag
v1v2trap v1v2trap
Table 17.
SNMPv3 Notify Table Information
Field
Description
Name
The locally arbitrary, but unique identifier associated with this
snmpNotifyEntry.
Tag
This represents a single tag value which is used to select entries in
the snmpTargetAddrTable. Any entry in the
snmpTargetAddrTable that contains a tag value equal to the
value of this entry, is selected. If this entry contains a value of zero
length, no entries are selected.