Lenovo RackSwitch G8332 Command Reference Manual page 422

422
G8332 Command Reference for ENOS 8.4
Table 196.
TCP/UDP Filtering Configuration Options
Command Syntax and Usage
access­control list <1‐256> tcp­udp destination­port
<1‐65535> [<mask (0xFFFF)>]
Defines a destination port for the ACL. If defined, traffic with the specified
TCP or UDP destination port will match this ACL. Specify the port number,
just as with source­port.
Command mode: Global configuration
no access­control list <1‐256> tcp­udp destination­port
Disables the configured destination port for the specified ACL.
Command mode: Global configuration
access­control list <1‐256> tcp­udp flags <value (0x0‐0x3f)>
[<mask (0x0‐0x3f)>]
Defines a TCP/UDP flag for the ACL.
Command mode: Global configuration
no access­control list <1‐256> tcp­udp flags
Disables the configured TCP/UDP flag for the specified ACL.
Command mode: Global configuration
default access­control list <1‐256> tcp­udp
Resets the TCP/UDP parameters for the ACL to their default values.
Command mode: Global configuration
show access­control list <1‐256> tcp­udp
Displays the current TCP/UDP Filtering parameters.
Command mode: All