Configurable Display For Blank Blf/List And Xmpp Presence-Related Favorite Softkeys - Mitel 6800 Series Administrator's Manual

To configure the display for blank BLF/List softkeys on the IP phone using the configuration
files, see Appendix A, the section,
Labels" on page A-266.
CONFIGURABLE DISPLAY FOR BLANK BLF/LIST AND XMPP PRES-
ENCE-RELATED FAVORITE SOFTKEYS
Note: Applicable to the 6867i, 6869i, and 6873i IP Phones only.
When softkeys for the 6867i, 6869i, and 6873i IP phones and the M685i Expansion Modules
are configured as BLF/List keys on the phone but there are not enough members in the BLF/List
on the BroadSoft server side, then a series of question marks (i.e. "???") are displayed on
screen beside some of the softkeys. The series of question marks are also displayed for unused
XMPP presence-related Favorite softkeys on the 6867i, 6869i, and 6873i IP phones when the
number of Favorite softkeys exceeds the number of UC-ONE favorite contacts.
Administrators can simply choose to hide the series of question marks using the "keys noname
hidden" parameter. If this parameter is set to "1" (enabled) then the series of question marks
will be hidden and nothing will be shown on the screen beside the affected softkeys. If this
parameter is set to "0" (disabled) then the series of question marks (or configured symbol) will
be displayed on the screen indicating blank BLF/List and/or Favorite softkeys.
Alternatively, applicable only to BLF/List softkeys, Administrators can configure the phone to
replace the series of question marks with a series of different symbols by defining the "keys
noname symbol" parameter with a desired character. For example, if keys noname symbol:
"e" is defined in the configuration files, the phone will display "eee" instead of "???".
CONFIGURING THE DISPLAY FOR BLANK BLF/LIST AND FAVORITE
SOFTKEYS
Use the following procedure to configure the display for blank BLF/List and Favorite softkeys:
CONFIGURATION FILES
To configure the display for blank BLF/List and Favorite softkeys on the IP phone using the
configuration files, see Appendix A, the section,
XMPP Presence-Related Favorite Softkeys"
CONFIGURABLE BLF OR BLF/LIST KEY BEHAVIOR WHEN IN AN AC-
TIVE CALL
Note: Applicable to the 6865i, 6867i, 6869i, and 6873i IP Phones only.
Administrators can configure the phone's behavior when a BLF or BLF/List softkey is pressed
during an active call. If the "blf key mode" parameter is defined as "0" (default), the BLF or
BLF/List number will be sent as DTMF tones in the active call. If defined as "1", the active call
"Configurable Display Modes for BLF and BLF/List Softkey
"Configurable Display for Blank BLF/List and
on
page A-267
Operational Features
.
5-176