Mitel 6800 Series Administrator's Manual page 224

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
9. In the Password field, enter the password used to register the IP phone with the SIP proxy.
Note: The IP phones accept numeric passwords only.
10. Press the Save softkey.
11. Restart the phone for the changes to take affect.
For the 6873i:
1. Press
2. Press the Advanced softkey.
3. Enter the Administrator password and press the blue Enter key. Default is "22222".
4. Press the SIP icon.
Note: If required, swipe left on the screen to navigate to the second page of options.
5. Press the User icon
6. In the User Name field, enter the username that appears in the name field of the SIP URI.
This user name is also used for registering the phone at the registrar.
Note: The IP phones allow usernames containing dots ("."). You can also enter the
same user name for different registrar and proxy IP addresses
7. In the Display Name field, enter the name used in the display name field of the "From SIP"
header.
8. In the Screen Name field, enter the name to display on the idle screen.
9. In the Auth. Name field, enter the authorization name used in the username field of the
Authorization header field of the SIP REGISTER request.
10. In the Password field, enter the password used to register the IP phone with the SIP proxy.
Note: The IP phones accept numeric passwords only.
11. Press the Save softkey.
12. Restart the phone for the changes to take affect.
MITEL WEB UI
4-71
on the phone to enter the Options List.