Press-And-Hold Speeddial Keypad Keys - Mitel 6800 Series Administrator's Manual

When the "collapsed more softkey screen" parameter is enabled for the 6869i IP phone, the
phone will apply the same behavior if 12 top softkeys or five bottom softkeys are configured.
When the "collapsed more softkey screen" parameter is enabled for the 6873i IP phone, the
phone will apply the same behavior if 12 top softkeys or six bottom softkeys are configured.
CONFIGURING THE COLLAPSED MORE SOFTKEY SCREEN OPTION
Use the following parameter to configure the collapsed more softkey screen option
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Programmable Key Settings"

PRESS-AND-HOLD SPEEDDIAL KEYPAD KEYS

The keypad keys on the IP phones can be used to store speeddial numbers that are dialed out
when a user presses and holds the respective key. These press-and-hold speeddial numbers
can be configured using the IP phone UI, the Mitel Web UI, or by defining the "pnhkeypadN
value" and "pnhkeypadN line" parameters in the configuration files.
CONFIGURING PRESS-AND-HOLD SPEEDDIAL KEYPAD KEYS
You can program one speeddial number for each applicable keypad key (keys 1 through 9).
For information on how to configure the press-and-hold keypad keys (as well as press-and-hold
speeddial softkeys or programmable keys) using the IP phone UI, please refer to the respective
phone model's SIP Phone User Guide.
Use the following procedures to configure the press-and-hold keypad keys.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the
section,
"Press-and-Hold Speeddial Keypad Key Settings"
MITEL WEB UI
on .
page A-232
Operational Features
on .
page A-246
5-158