Mitel 6800 Series Administrator's Manual page 207

10. In the LAN Port VLAN > RTP Priority field, enter a value from 0 to 7 to specify the RTP
priority for the LAN Port. Default is 5.
11. In the LAN Port VLAN > RTCP Priority field, enter a value from 0 to 7 to specify the RTCP
priority for the LAN Port. Default is 5.
To set VLAN ID and priority for PC Port (Port 1):
12. In the PC Port VLAN > PC Port VLAN ID field, enter a value from 1 to 4095 to specify the
VLAN ID for the LAN Port. Default is 4095.
Note: Setting the PC Port VLAN ID to 4095 and LAN Port VLAN ID to any ID from
1 to 4094 will allow frames from the LAN port (containing a VLAN ID) to be untagged
before being forwarded to the PC port and frames from the PC port (without a VLAN
ID) to be tagged with the configured VLAN ID before being forwarded to the LAN port.
Example:
You enable tagging on the phone port as normal but set the PC Port VLAN ID to 4095 and
the LAN Port VLAN ID to any ID from 1 to 4094. The following example sets the LAN port
to be on VLAN 3 but the PC port is configured as untagged.
• VLAN Settings > VLAN: Enable
• VLAN Settings > LAN Port VLAN > LAN Port VLAN ID: 3
• VLAN Settings > PC Port VLAN > PC Port VLAN ID: 4095
13. In the PC Port VLAN > Priority field, enter a value from 0 to 7 to specify the PC Port VLAN
priority. Default is 0.
14. Press the Save softkey.
15. Restart the phone for the selection to take affect.
MITEL WEB UI
1. Click on Advanced Settings->Network->VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
Network Settings
4-54