Mitel 6800 Series Administrator's Manual page 178

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5. In the IP Address field, enter the IP address of your phone. The IP Address must be entered
in the format 0.0.0.0; for example, 192.168.0.7.
6. In the Subnet Mask field, enter the subnet mask address. For example, 255.255.0.0.
7. In the Gateway field, enter the IP address of your gateway. The Gateway must be entered
in the format 0.0.0.0; for example, 192.168.0.1.
8. If required, enter the Primary DNS and/or Secondary DNS in the respective fields. The IP
addresses must be entered in the format 0.0.0.0.
9. Press the Save softkey.
The IP Phone is manually configured.
For the 6873i:
Note: To manually configure DHCP parameters, DHCP must be disabled on the phone.
1. Press
2. Press the Advanced softkey.
3. Enter the Administrator password and press the blue Enter key. Default is "22222".
4. Press the Network icon.
Note: If required, swipe left on the screen to navigate to the second page of options.
5. Press the Settings icon.
6. In the IP Address field, enter the IP address of your phone. The IP Address must be entered
in the format 0.0.0.0; for example, 192.168.0.7.
7. In the Subnet Mask field, enter the subnet mask address. For example, 255.255.0.0.
8. In the Gateway field, enter the IP address of your gateway. The Gateway must be entered
in the format 0.0.0.0; for example, 192.168.0.1.
9. If required, enter the Primary DNS and/or Secondary DNS in the respective fields. The IP
addresses must be entered in the format 0.0.0.0.
10. Press the Save softkey.
The IP Phone is manually configured.
MITEL WEB UI
4-25
on the phone to enter the Options List.