Autodial Settings - Mitel 6800 Series Administrator's Manual

AUTODIAL SETTINGS

Global Settings
PARAMETER –
sip autodial number
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip autodial timeout
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Globally specifies the SIP phone number that the IP phone autodials
when the handset is lifted from the phone cradle. An empty (blank)
value disables autodial on the phone.
Integer
Blank
Any valid SIP number
sip autodial number: 8500
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Globally specifies the time, in seconds, that the phone waits to dial a
pre-configured number after the handset is lifted from the IP phone
cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
pre-configured number when you lift the handset. If this parameter is
set to a value greater than 0, the phone waits the specified number
of seconds before dialing the pre-configured number (warmline)
when you lift the handset.
Default is 0 (hotline).
Integer
0
0-120
sip autodial timeout: 30
A-125