Xml Beep Support - Mitel 6800 Series Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide

XML BEEP SUPPORT

The IP phones have a feature that allows you to enable or disable a beep on the phone when
it receives a status message from an XML application. This beep can be turned ON or OFF
using the Mitel Web UI, the configuration files, or in an XML script. If you disable this feature,
then no beep is heard when the XML application arrives to the phone.
If your System Administrator has set a value for this feature in a custom XML application or in
the configuration files, the value you set in the Mitel Web UI overrides the Administrator's setting.
Setting and saving the value in the Mitel Web UI applies to the phone immediately.
REFERENCE
For more information about enabling/disabling the XML Beep Support in an XML script, see
"XML Customized Services"
CONFIGURING XML BEEP SUPPORT
Use the following procedures to enable/disable XML Beep Support.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
Settings" page A-165
5-81
on page 5-284.
.
"XML