Configurable Positioning Of Programmed Softkeys - Mitel 6800 Series Administrator's Manual

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters

CONFIGURABLE POSITIONING OF PROGRAMMED SOFTKEYS

Note: Applicable to the 6867i, 6869i, and 6873i IP Phone only.
PARAMETER –
collapsed softkey screen
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER
collapsed softkey
screen offset top
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLES
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the 6867i/6869i/6873i from collapsing the
softkeys to remove blank keys. When enabled, the phone will
remove all the softkeys defined as "None" and display the
programmed softkeys in consecutive order. When disabled, the
softkey will retain its programmed position. This parameter applies to
both top and bottom softkeys.
Integer
1 (Enabled)
0-1
0 (Disabled)
1 (Enabled)
collapsed softkey screen: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Defines the offset for locking or collapsing the top softkeys.
If the "
collapsed softkey screen" parameter is enabled, the phone will
lock the respective top softkeys (from top softkey 1 to the value defined)
and collapse the rest of the top softkeys.
If the "
collapsed softkey screen" parameter is disabled, the phone will
collapse the respective top softkeys (from top softkey 1 to the value
defined) and lock the rest of the top softkeys.
Integer
0
• 1 - 19 (6867i)
• 1 - 43 (6869i)
• 1 - 47 (6873i)
collapsed softkey screen offset top: 4
A-229