Mitel 6800 Series Administrator's Manual page 656

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
For the 6873i:
1. Press
2. Press the BroadSoft Call Settings icon.
Note: If required, swipe right to switch pages in the Options List.
3. Press the Remote Office icon.
4. Press the left and right arrow buttons in the Remote Office field to enable or disable the
service.
5. Press the Phone Number/SIP-URI field and using the on-screen keyboard or dialpad keys
enter the phone number or SIP-URI you want all incoming calls to be forwarded to.
6. Press the Save softkey to save your changes.
BROADSOFT BROADWORKS SIMULTANEOUS RING PERSONAL
SUPPORT
Note: This service is applicable to the 6867i, 6869i, and 6873i SIP Phones.
The BroadSoft BroadWorks Simultaneous Ring Personal service is supported by the 6800
series SIP phones. The BroadWorks Simultaneous Ring Personal service allows users the
ability to define up to 10 phone numbers or SIP-URIs and independently set which phone
numbers should ring when a call is incoming to their primary phone.
To specifically enable Simultaneous Ring Personal support on the phone, Administrators must
define the "xsi simultaneous ring personal" parameter in the respective configuration file as
"1". When enabled, users have the ability to enable and disable simultaneous ring functionality
for up to 10 phone numbers. Users can also specify whether or not simultaneous ringing should
occur when on an active call.
6-67
on the phone to enter the Options List.