Mitel 6800 Series Administrator's Manual page 257

HTTP SETTINGS
• Select HTTP Server
• Enter the IP address of the HTTP server.
• Press Done or Set.
• Select HTTP Path.
• Enter the path name for which the configuration files reside on the HTTP server for
downloading to the IP Phone. If the IP phone's files are located in a sub-directory beneath
the server's root directory, the relative path to that sub-directory should be entered in this
field. Enter the path name in the form folderX\folderX\folderX. For example,
ipphone\6863i\configfiles.
• Select HTTP Port.
• Enter the HTTP port that the server uses to load the configuration to the phone over HTTP.
Default is 80.
• Press Done or Set.
HTTPS SETTINGS
• Select HTTP Client.
• Select Download Server.
• Enter the IP address of the HTTPS server.
• Press Done or Set.
• Select Download Path.
• Enter the path name for which the configuration files reside on the HTTPS server for
downloading to the IP Phone. If the IP phone's files are located in a sub-directory beneath
the server's root directory, the relative path to that sub-directory should be entered in this
field. Enter the path name in the form folderX\folderX\folderX. For example,
ipphone\6863i\configfiles.
• Press Done or Set.
• Select Client Method.
• Select the client method to use for downloading the configuration files (TLS Preferred, TLS
1.0, TLS 1.1, TLS 1.2, or SSL 3.0). For more information about which client method to use,
see the section, "HTTPS Client/Server Configuration"
• Select Download Port.
• Enter the HTTPS port that the server uses to load the configuration to the phone over
HTTPS. Default is 443.
• Select HTTPS Server.
• Select HTTP->HTTPS.
• Press Change to select "Do not redirect" or "Redirect". Default is "Do not redirect".
Enabling this feature redirects the HTTP protocol to HTTPS.
• Press Set.
• Select XML HTTP POSTs.
• Press Change to select "Do not block" or "Block". Enabling this feature blocks XML HTTP
POSTs from the IP Phone.
Configuration Server Protocol
on page 4-34.
4-104