Sip Outbound Support - Mitel 6800 Series Administrator's Manual

SIP OUTBOUND SUPPORT

PARAMETER –
sip outbound support
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONTACT HEADER MATCHING
PARAMETER –
sip contact matching
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables and disables whether or not the phone uses Draft 15
(draft-ietf-sip-outbound-15) support for SIP outbound packets.
A SIP User Agent (UA) behind a firewall, reuses an existing
connection (usually the REGISTER outbound connection) for the
inbound request if the proxy supports it. The UA uses keep-alive
packets to monitor the connection status.
Notes:
• If the Global SIP parameter "Persistent TLS" is set on the phone,
then only one TLS persistent connection can be established since
the phone uses the local port 5061 for connection. If the Global
SIP parameter "TLS" is set on the phone, more than one
connection can be setup since the phone uses a random local port
for connection.
• This parameter must be enabled for this feature to start keep-alive
for a particular transport.
Boolean
0
0 (disabled)
1 (enabled)
sip outbound support: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the method for which the phone uses to match the Contact
header in a SIP registration packet.
Integer
2 (matching username only)
0(default) URI matching of username, domain name, phone IP and
port, and transport
1matching of phone IP only
2matching of username only
3matching of phone IP and username only
sip contact matching: 1
A-71