Mitel 6800 Series Administrator's Manual page 788

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
TIME ZONE NAME
PARAMETER –
time zone name
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-46
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Assigns a time zone name to the time server.
The Custom option allows you to customize additional time zone
parameters.
The DP-Dhcp option allows you to enable and disable a DHCP
Option 2 value for the phone to use as an offset from Coordinated
Universal Time (UTC). If this parameter is enabled, the phone
derives the time and date from UTC and the time offset offered by
the DHCP server.
Notes:
• Assigning the name "Custom" (with initial cap) in the
configuration files, allows you to create a custom time zone using
the additional parameters in the section
DST Settings" on page
• When DHCP Option 2 is enabled on the phone, the phone still
uses the custom timezone configuration settings to control
daylight savings time.
• The default behavior for the phone is to use the NTP server from
Option 42 (or current configuration setting) and the current
timezone settings.
Text
US-Eastern
Note: If the time zone name parameter is set to a value other than
Dhcp, then DHCP Option 2 is disabled.
See "Time Zone Name/Time Zone Code Table"
specific time zone names.
Custom (allows you to create a customized time zone).
DP-Dhcp (allows you to enable and disable a DHCP Option 2 value
for the phone to use as an offset from Coordinated Universal Time
(UTC))
time zone name: US-Central
time zone name: Custom
time zone name: DP-Dhcp
"Custom Time Zone and
A-53.
on page A-47 for