Mitel 6800 Series Administrator's Manual page 186

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
Configuring SIP and TLS Source Ports Using the Mitel Web UI
Use the following procedure to configure SIP and TLS source ports using the Mitel Web UI.
MITEL WEB UI
1. Click on Advanced Settings->Global SIP->Advanced SIP Settings.
2. The "Local SIP UDP/TCP Port" field has a default value of 5060. Change this value if
required to a value greater than 1024 and less than 65535.
Note: It is recommended that you avoid the conflict RTP port range in case of a
UDP transport.
3. The "Local SIP TLS Port" field has a default value of 5061. Change this value if required
to a value greater than 1024 and less than 65535.
Note: It is recommended that you avoid the conflict with any TCP ports being used.
For example: WebUI HTTP server on 80/tcp and HTTPS on 443/tcp.
4. Click Save Settings to save your changes.
4-33