Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
CALL HOLD REMINDER (ON SINGLE HOLD)
In previous releases, the call hold reminder ring splash was triggered when you hung up a call
and there was at least one other call on hold. The reminder ring splash timer started only when
the active call hung up and there was still another call on hold.
On the IP phones, a User or Administrator can enable or disable a feature that would start the
reminder ring splash timer as soon as you put a call on hold (even when no other calls are
active on the phone). When enabled, the phone initiates a reminder ring splash periodically for
the single call on hold. When disabled, no reminder ring splash is audible.
You can enable or disable this feature using the "call hold reminder" parameter in the
configuration files or in the Mitel Web UI.
CONFIGURING "CALL HOLD REMINDER"
You use the following procedure to enable or disable "Call Hold Reminder".
CONFIGURATION FILES
For the specific parameter you can set in the configuration files for enabling/disabling "Call Hold
Reminder", see Appendix A, the section,
MITEL WEB UI
1. Click on Basic Settings->Preferences->General.
5-87
"Call Hold Reminder Settings"
on
.
page A-180