Mitel 6800 Series Administrator's Manual page 830

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
PARAMETER –
sip lineN backup proxy port
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip lineN outbound proxy
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip lineN outbound proxy port
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-88
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The backup proxy's port number.
Integer
0
N/A
sip line1 backup proxy port: 5060
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
This is the address of the outbound proxy server. All SIP messages
originating from the phone are sent to this server. For example, if
you have a Session Border Controller in your network, then you
would normally set its address here.
IP Address or fully qualified Domain Name
0.0.0.0
N/A
sip outbound proxy: 10.42.23.13
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The proxy port on the proxy server to which the IP phone sends all
SIP messages.
Integer
0
N/A
sip outbound proxy port: 5060