Mitel 6800 Series Administrator's Manual page 118

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
PARAMETER
IN
IP PHONE UI
SIP Priority
RTP Priority
RTCP Priority
PC PORT SETTINGS (PORT 1)
PC Port VLAN
ID
PC Port Priority Priority
3-47
PARAMETER IN PARAMETERS IN
MITEL WEB UI CONFIGURATION
FILES
SIP Priority tos priority map
RTP Priority
RTCP Priority
VLAN ID vlan id port 1
qos eth port 1
priority
DESCRIPTION
This parameter is based on the Type of
Service (ToS), Differentiated Services
Code Point (DSCP) setting for SIP (tos sip
parameter), RTP (tos rtp parameter) and
RTCP (tos rtcp parameter). It is the
mapping between the DSCP value and the
VLAN priority value for SIP, RTP, and
RTCP packets.
You enter the tos priority map value as
follows:
(DSCP_1,Priority_1)(DSCP_2,Priority_2)..
...(DSCP_64,Priority_64)
where the DSCP value range is 0-63 and
the priority range is 0-7. Mappings not
enclosed in parentheses and separated
with a comma, or with values outside the
ranges, are ignored.
For more information, see Chapter 4,
"Virtual LAN (optional)" on
Allows you to configure a VLAN ID that
associates with the physical Ethernet Port
1 (PC port).
For more information, see Chapter 4,
"Virtual LAN (optional)" on
Specifies the priority value used for
passing VLAN packets through to a PC via
Port 1.
For more information, see Chapter 4,
"Virtual LAN (optional)" on
page 4-44.
page 4-44.
page 4-44.