Mitel 6800 Series Administrator's Manual page 169

An Administrator can configure the DHCP Option 77 User Class via the configuration files and
the IP Phone UI.
Configuring DHCP Option 77 User Class on the IP Phone
Use the following procedures to configure DHCP Option 77 User Class on the IP Phone.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"DHCP Option Settings"
IP PHONE UI
For the 6863i/6865i:
1. Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select Network Settings.
4. Select DHCP Settings.
5. Select DHCP User Class.
6. In the "DHCP User Class" field, enter a DHCP User Class to apply to your phones, then
press DONE.
Valid values are up to 64 alpha-numeric characters. For example, "admin".
7. Restart the phone for the change to take affect.
For the 6867i/6869i:
1. Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is "22222".
4. Select Network > Settings.
5. Press the down navigation key to the DHCP User Class field.
6. In the "DHCP User Class" field, enter a DHCP User Class to apply to your phones, then
press the Save softkey.
Valid values are up to 64 alpha-numeric characters. For example, "admin".
7. Restart the phone for the change to take affect.
For the 6873i:
1. Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password and press the blue Enter key. Default is "22222".
on page A-13.
Network Settings
4-16