Mitel 6800 Series Administrator's Manual page 121

PARAMETER PARAMETER IN
IN MITEL WEB UI
IP PHONE UI
Password Password
(Global and
Per-Line)
N/A BLA Number
(Global and
Per-Line)
N/A Line Mode
(Global and
Per-Line)
N/A Call Waiting
PARAMETERS IN DESCRIPTION
CONFIGURATION
FILES
sip password Password used to register the IP phone
with the SIP proxy. Valid values are up to
(global)
20 alphanumeric characters. Passwords
are encrypted and display as asterisks
sip lineN password
when entering.
(per-line)
Note: The "mask sip password" parameter
can be used to mask a user's SIP account
password in the server.cfg and local.cfg
files (downloaded from the IP phone's
Web UI troubleshooting page for debug
purposes).
For more information, see Chapter 4,
"Basic SIP Settings"
sip bla number Phone number that you assign to BLA
lines that is shared across all phones
(global)
(global configuration) or shared on a
per-line basis (per-line configuration).
sip lineN bla number
(per-line)
For more information, see Chapter 4,
"Basic SIP Settings"
For more information about BLA, see
Chapter 5, the section,
Appearance (BLA)"
sip mode The mode-type that you assign to the IP
phone. Valid values are Generic (0),
(global)
BroadSoft SCA (1), Reserved for (2), or
BLA (3). Default is Generic (0).
sip lineN mode
(per-line)
For more information, see Chapter 4,
"Basic SIP Settings"
call waiting Enable or disables Call Waiting on the IP
Phone.
For more information on this feature, see.
"Call Waiting"
Administrator Level Options
on page 4-60.
on page 4-60.
"Bridged Line
on page 5-207.
on page 4-60.
on page 5-75.
3-50