Mitel 6800 Series Administrator's Manual page 812

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
PARAMETER –
sip dial plan terminator
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip digit timeout
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-70
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies whether or not pressing the hash/pound (i.e. "#") key, while
performing an outgoing call on an open line, should be sent as %23
to the proxy in the dial string or if the key should be used as a dial
plan terminator (i.e. dials out the call immediately).
When enabled, the hash/pound key does not act as a dial plan
terminator and is instead sent as %23 to the proxy in the dial string.
When disabled (default), the hash/pound key acts as a dial plan
terminator.
Boolean
0 (Disabled)
0 (Disabled - # used as a dial plan terminator)
1 (Enabled - # sent as %23 in dial string)
sip dial plan terminator: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Represents the time, in seconds, between consecutive key presses
on the IP phone. The default for this parameter is 4 seconds. If you
press a key on the phone and wait 4 seconds before pressing the
next key, the key times out and cancels the digit selection. You must
press consecutive keys before the timeout occurs.
Integer
4
N/A
sip digit timeout: 6