IP PHONE UI
For the 6863i/6865i:
1. Press
on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select Configuration Server.
4. Select Download Protocol.
5. Select from the following:
•
Use TFTP
•
Use FTP
•
Use HTTP
•
Use HTTPS
Default is "Use TFTP".
The IP phone uses the protocol you select to download new firmware and configuration
files from the configuration server.
6. Press Set to save the changes.
7. From the Configuration Server menu, select from the following. This selection is dependent
on the Download Protocol you selected in step 6.
•
TFTP Settings
•
FTP Settings
•
HTTP Settings
•
HTTPS Settings
8. Enter the IP address of the protocol server (in dotted decimal format).
Configuration Server Protocol
4-102