Mitel 6800 Series Administrator's Manual page 857

PARAMETER –
802.1x local certificate
Description
FORMAT
Default Value
Range
Example
PARAMETER –
802.1x private key
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the file name that contains the local certificate.
You can use this parameter in three ways:
• To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A
FILENAME at the end of the string. For example:
802.1x local
certificate:ftp://admin:admin!@1.2.3.4:50/path/phones802LocalCert
.pem
where "path" is the directory and "phones802LocalCert.pem" is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
String
N/A
N/A
The following example downloads no local certificate file:
802.1x local certificate:
The following example downloads the local certificate file from the
original configuration server.
802.1x local certificate: phones802LocalCert.pem
The following example uses FTP to download the firmware file
"phones802LocalCert.pem" (802.1x local certificate file) from the
"path" directory on server 1.2.3.4 using port 50:
802.1x local
certificate:ftp://admin:admin!@1.2.3.4:50/path/phones802LocalCert
.pem
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the file name that contains the private key.
String
N/A
N/A
802.1x private key: filename.pem
A-115