Option To Remove The "More" Softkey When Not Required - Mitel 6800 Series Administrator's Manual

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters

OPTION TO REMOVE THE "MORE" SOFTKEY WHEN NOT REQUIRED

Note: Applicable to the 6867i, 6869i, and 6873i IP Phone only.
PARAMETER –
collapsed more softkey screen
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Controls how softkeys are displayed on the 6867i, 6869i, and 6873i
IP phones' screens when the number of softkeys configured
matches the exact number of softkey buttons on the phone.
By default, when a total of six top softkeys and four bottom softkeys
are configured for the 6867i IP phone, the screen displays five top
softkeys, four bottom softkeys and "More" options to access the
remaining softkeys. When this parameter is enabled, the "More"
softkeys are removed allowing the phones to display all configured
top and bottom softkeys on one screen.
The same behavior is applied to the 6869i when 12 top softkeys or 5
bottom softkeys are configured.
The same behavior is applied to the 6873i when 12 top softkeys or 6
bottom softkeys are configured.
Integer
0 (Disabled)
0-1
0 (Disabled)
1 (Enabled)
collapsed more softkey screen: 1
A-231