Mitel 6800 Series Administrator's Manual page 756

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
OPTION 60
PARAMETER –
dhcp opt60 extended vendor
class
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
OPTION 77
PARAMETER –
dhcp userclass
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-14
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies whether to send a DHCP Option 60 value consisting of the
identifier value only, or an extended DHCP Option 60 value
consisting of the identifier, firmware version, and bootrom version. If
the latter, the syntax is as follows:
"Identifier Value + Firmware Version + BootRom Version"
Integer
0 (Disabled)
0-1
0 (Disabled - Sends only the identifier value)
1 (Enabled - Sends the identifier value, firmware version, and
bootrom version)
dhcp opt60 extended vendor class: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the User Class DHCP Option 77 that the phone sends to
the configuration server with the DHCP Request packet.
Note: If you specify a value for this parameter, you must restart your
phone for the change to take affect. Any change in its value during
start-up results in an automatic reboot.
String
N/A
Up to 64 alpha-numeric characters
dhcp userclass: admin