Mitel 6800 Series Administrator's Manual page 93

PARAMETER IN PARAMETER IN
MITEL WEB UI CONFIGURATION
FILES
Call Waiting Tone call waiting tone
Period period
Note: This option can
be set by an
Administrator only.
Preferred Line preferred line
Note: This option can
be set by both Users
and Administrators.
Preferred Line preferred line timeout
Timeout (seconds)
Note: This option can
be set by both Users
and Administrators.
Goodbye Key goodbye key cancels
Cancels Incoming incoming call
Call
Note: This option can
be set by both Users
and Administrators.
Message Waiting mwi led line
Indicator Line
Note: This option can
be set by both Users
and Administrators.
DND Key Mode dnd key mode
Note: This option can
be set by both Users
and Administrators.
Administrator Level Options
DESCRIPTION
Specifies the time period, in seconds, that the call
waiting tone is audible on an active call when another
call comes in. When enabled, the call waiting tone
plays at regular intervals for the amount of time set for
this parameter. For example, if set to "30" the call
waiting tone plays every 30 seconds. When set to "0",
the call waiting tone is audible only once on the active
call.
For more information on this feature, see
Waiting Tone Period" on page
Specifies the preferred line to switch focus back to
when incoming or outgoing calls end on the phone.
For more information on this feature, see
Line and Preferred Line Timeout"
Specifies the time, in seconds, that the phone
switches back to the preferred line after a call
(incoming or outgoing) ends on the phone, or after a
duration of inactivity on an active line.
For more information on this feature, see
Line and Preferred Line Timeout"
Enable or disables the behavior of the Goodbye Key
on the IP phone.
For more information on this feature, see
Key Cancels Incoming Call"
Allows you to enable the Message Waiting Indicator
(MWI) on a single line or on all lines on the phone. For
example, if you set this parameter to 3, the LED
illuminates if a voicemail is pending on line 3. If you
set this parameter to 0, the LED illuminates if a
voicemail is pending on any line on the phone.
For more information on this feature, see
Waiting Indicator Line" on
Allows you to configure the DND mode to use on the
phone (Account, Phone, Custom) when the DND key
is pressed. You can configure DND for all accounts or
a specific account.
For more information on this feature, see
Mode" on page 5-95. Also see Chapter 5, the section,
"Do Not Disturb (DND)" on
"Call
5-78.
"Preferred
on page 5-89.
"Preferred
on page 5-89.
"Goodbye
on page 5-91.
"Message
page 5-93.
"DND Key
page 5-198.
3-22