Mitel 6800 Series Administrator's Manual page 553

8. Click Save Settings to save your changes.
The XML application is applied to the IP phone immediately.
When the XML application is pushed to the phone via an HTTP POST, a host IP address
or DNS server is required.
9. Click on Advanced Settings->Configuration Server.
10. In the "XML Push Server List (Approved IP Addresses)" field, enter the host IP address
and/or DNS server. You can enter multiple IP address and/or DNS servers (separated by
commas). In the example in Step 8, the illustration shows a host IP address of "10.50.10.53,
10.50.10.54" in the applicable field.
11. Click Save Settings to save your changes.
Note: No posting is performed if a session times out.
For the 6863i/6865i:
MITEL WEB UI
1. Click on Operation->Programmable Keys.
2. Select an available key.
3. In the "Type" field, select XML from the list box.
4. In the "Value" field, enter the IP address or qualified domain name of the XML application.
5. In the "XML Application URI" field, enter the HTTP server path or qualified domain name
of the XML application you want to load to the IP phone. For example, you could enter an
XML application called "http://172.16.96.63/mitel/internet.php" in the applicable field.
Operational Features
5-290