STUTTERED DIAL TONE
You can enable or disable the playing of a stuttered dial tone when there is a message waiting
on the IP phone.
You can configure this feature using the configuration files and the Mitel Web UI.
CONFIGURING STUTTERED DIAL TONE
Use the following procedures to configure stuttered dial tone on the IP phones.
CONFIGURATION FILES
For specific parameters you can set in the configuration files for enabling/disabling stuttered
dial tone, see Appendix A, the section,
MITEL WEB UI
1. Click on Basic Settings->Preferences->General.
2. The "Stuttered Dial Tone" field is enabled by default. To disable this field, uncheck the box.
3. Click Save Settings to save your changes.
"Stuttered Dial Tone Setting"
Operational Features
on
.
page A-184
5-80