Mitel 6800 Series Administrator's Manual page 562

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5. Enter an XML URI for an incoming call event in the "Incoming Call" field. For example:
http://10.50.10.140/incoming.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an incoming
call event occurs.
Note: For an incoming call event, use the associated variables indicated in the table
"Action URIs and Associated Variables"
6. Enter an XML URI for an outgoing call event in the "Outgoing Call" field. For example:
http://10.50.10.140/outgoing.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an outgoing
call event occurs. .
Note: or an outgoing call event, use the associated variables indicated in the table
"Action URIs and Associated Variables"
7. Enter an XML URI for an offhook event in the "Offhook" field. For example:
http://10.50.10.140/offhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an offhook
event occurs.
Note: For an offhook event, use the associated variables indicated in the table
"Action URIs and Associated Variables"
8. Enter an XML URI for an onhook event in the "Onhook" field. For example:
http://10.50.10.140/onhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an onhook
event occurs.
Note: For an onhook event, use the associated variables indicated in the table
"Action URIs and Associated Variables"
9. To configure a Connected event, see the section,
10. To configure a Disconnected event, see the section,
11. To configure an XML SIP Notify event, see the section,
12. (Optional) You can poll a URI at specific intervals on the phones. For more information
about polling Action URIs, see
13. Click Save Settings to save your changes.
POLLING ACTION URIS
Another way to reach a phone behind a firewall is to have the phone make an XML call at
periodic intervals. An Administrator can use the action uri poll parameter that commands the
phone to perform an XML call at configurable intervals.
An Administrator can specify the URI to be called and specify the interval between polls using
the configuration files or the Mitel Web UI. Configuration of this feature is dynamic (no reboot
required).
5-299
on
page 5-294
on
page 5-294
on
page 5-294
on
page 5-294
"Action URI Connected"
"Action URI Disconnected"
"XML SIP Notify Events"
on
"Polling Action URIs" page 5-299
.
.
.
.
on
page 5-301
on
page 5-302
on
page 5-306
.
.
.
.