Mitel 6800 Series Administrator's Manual page 987

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
PARAMETER –
topsoftkeyN line
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
This is the line associated with the softkey you are configuring. The
number of applicable lines available is dependent on the specific IP
phone model.
The "topsoftkeyN line" parameter can be set for the following
softkey types only:
• speeddial
• blf
• list
• acd
• lcr
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• redial
• filter
Integer
1
1-24
topsoftkey1 line: 1
topsoftkey2 line: 5
A-245