Conference/Transfer Support For Live Dial Mode - Mitel 6800 Series Administrator's Manual

Hide thumbs Also See for 6800 Series:

Table of Contents

CONFIGURING THE "SIP JOIN" FEATURE USING THE CONFIGURATION

You use the following parameters to configure the "SIP Join feature in the configuration files:

sip join support

CONFIGURATION FILES

For specific parameters you can set in the configuration files, see Appendix A, the section,

Join Feature for 3-Way Conference"

CONFERENCE/TRANSFER SUPPORT FOR LIVE DIAL MODE

By default, when users are initiating a conference call or transfer, they will not hear a dial tone

before dialing begins (pre-dial mode). The phone does not automatically dial out the number

until the user presses the "Conf" or "Transfer" key. This allows the users to make changes to

the dialing number before initiating the call.

Administrators can enable live dial mode in a conference call or transfer scenario by configuring

the "confxfer live dial" parameter. Two live dial mode options are available:

Live dial mode with dial plan matching: When a user initiates a conference call or transfer,

they hear a dial tone before dialing begins. The phone automatically dials out if the number

matches the local dial plan or if it reaches the set digit timeout.

Live dial mode without dial plan matching: When a user initiates a conference call or

transfer, they hear a dial tone before dialing begins. The phone does not match the number

to the local dial plan and automatically dials out only if it reaches the set digit timeout (or if

the number matches a number defined in the emergency dial plan).

In the default pre-dial mode, users are able to edit the destination number prior to dialing,

whereas in live dial mode they are not able to; however, the "Dial" and "Cancel" softkeys are

provided while the user inputs the number.

Note: In a transfer scenario, when the "confxfer live dial" parameter is defined as "2",

if the number of the transfer recipient is entered and the "Xfer" key is pressed before

the set digit time out, the phone will attempt a blind transfer.

CONFIGURING CONFERENCE/TRANSFER IN LIVE DIAL MODE

You use the following parameters to configure conference/transfer feature in live dial mode:

confxfer live dial

CONFIGURATION FILES

For specific parameters you can set in the configuration files, see Appendix A, the section,

"Conference/Transfer in Live Dial Mode"

Operational Features

Show Quick Links

Table of Contents