Mitel 6800 Series Administrator's Manual page 317

language for the IP Phone UI. You can use the configuration files (via the "web language"
parameter) and Mitel Web UI to specify the files for the Mitel Web UI.
Use the following procedures to specify the language to use on the IP phone.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
"Language Settings" page A-195
Notes:
1. If you specify the language to use on the phone via the configuration files, you must
reboot the phone for the changes to take affect.
2. All languages may not be available for selection. The available languages are
dependent on the language packs currently loaded to the IP phone.
and
"Language Pack Settings"
Operational Features
on .
page A-197
5-54